MEPCO Peak Hours 2026: Complete Timing Guide to Reduce Your Bill

Your MEPCO bill isn’t just about how many units you burn through, but also when you use them.

For 2026, MEPCO’s peak hours are basically between 6 PM and 10 PM. That’s the window when everyone’s home, everything’s switched on, and the demand shoots up. And because of that, the rates climb too. So if you’re running the AC, doing a load of laundry, switching on the heater, or even ironing during that time, yeah, it bites into your bill more than you think.

Shift those things to the off-peak hours, and you’ll feel the noticeable difference. Your bill drops a bit, the grid breathes easier, and you’re using power in a smarter, more relaxed way.

MEPCO Peak Hours Schedule 2026 (Updated)

NEPRA reviews all of this every year. They look at how people are actually using electricity and then tweak MEPCO’s schedule under their Load Management Plan. To encourage conservation and reduce peak-hour energy use, MEPCO with the approval of NEPRA, has established a pricing structure based on time. So knowing the peak and off-peak slots helps you avoid unnecessary usage without really changing your routine. Just small adjustments that add up.

The price of MEPCO’s electric service increases during peak hours when energy usage is at its highest and decreases when energy usage is at its lowest.

Here is the updated MEPCO peak hour schedule for 2026:

Connection Type	Summer Peak Hours	Winter Peak Hours	Off-Peak Hours
Residential Users	6 PM – 10 PM	6 PM – 10 PM	10 PM – 6 PM
Commercial Users	9 AM – 1 PM	9 AM – 1 PM	1 PM – 9 AM

Electricity demand also varies seasonally across Pakistan. Here are the general peak-hour patterns:

Season	Peak Hours
December to February	5 PM – 9 PM (4 Hours duration)
March to May	6 PM – 10 PM (4 Hours duration)
June to August	7 PM – 11 PM (4 Hours duration)
September to November	6 PM – 10 PM (4 Hours duration)

The following timings correspond with MEPCO postings and NEPRA tariff revisions for 2026.

Customers are advised to verify current timings either by checking the MEPCO online portal or by calling customer service, as there may be slight seasonal deviations from the public information.

Also Learn: Smart tips to reduce your electricity bills

Why Avoiding Peak Hours Saves You Money

MEPCO applies separate rates for peak and off-peak usage. When demand is high, the cost per unit increases. When demand drops, the cost reduces.

For example:

• Running a 1-ton AC for two hours during peak time may cost around Rs. 160
• Running the same AC for two hours during off-peak time may cost around Rs. 80

This simple adjustment in your routine can significantly lower your electricity bill each month. It also helps reduce overall power load, benefiting the entire region.

MEPCO provides several billing rates for electricity based on time of use, such as peak and off-peak hour rates.

Smart Electricity Usage Tips During Off-Peak Hours

You can improve home efficiency and lower your MEPCO bill by shifting energy-heavy tasks to off-peak hours.

• Shift the heavy work to off-peak times. Running appliances during off-peak hours quietly trims your monthly bill without changing your routine much.
• Use energy-saving appliances like an inverter A/C, an energy-saving fan, or even a newer washing machine that uses noticeably fewer units compared to older models.
• Swap out old bulbs for LEDs. They stay brighter for longer and cut your lighting costs down to a fraction.
• Switch off anything that’s just sitting idle. Chargers, TVs, kitchen appliances as standby power adds up more than most people realize.
• Set your water motor, A/C, or outdoor lights to run only when needed. Once you automate these habits, the savings follow without effort.

Small, consistent adjustments make a real difference. You can use the MEPCO Bill Calculator to estimate bill reduction from switching to off-peak usage.

How to Check If You’re Charged for Peak Hours

Checking whether you were billed for peak-hour usage is simple:

• First check your Mepco bill
• Look for the TOU (Time of Use) section on your MEPCO bill
• It shows units consumed in Peak and Off-Peak slots
• Compare the unit rates to understand which time period cost you more

To see trends over months, check MEPCO Bill History. It helps identify high-usage months and track seasonal patterns.

The more often you check your usage, the easier it becomes to plan and avoid high charges.

FAQs

Does MEPCO have different peak hours for single-phase and three-phase meters?

No, both single-phase and three-phase domestic meters follow the same peak-hour schedule. Only commercial and industrial users may have different timings.

Are MEPCO peak hours the same for agricultural tube-well connections?

Tube-well consumers usually have separate tariff rules and may not follow standard residential peak hours. It’s best to confirm the timing with the local MEPCO office.

Does MEPCO charge penalties for high usage during peak hours?

There is no separate penalty, but peak-hour units are charged at a higher rate. Using more units in this window automatically increases the bill.

Final Thoughts – Save More by Knowing Your Hours

If you know MEPCO’s peak periods for 2026, you can save energy and lower your usage rates.

Use the large appliances and equipment during non-peak periods when MEPCO’s tariff is lowest, saving money and becoming more economical.

Also, please visit the MEPCO website to obtain the updated MEPCO rates, settings, and applicable hours of the day for your area or service.

Being smart today will help you save and adopt a more efficient energy-use lifestyle. Start now by creating and practicing energy-smart ways to save each month.